helferleinform Discussions Rss Feed

New Post: Dotnetnuke Form Pattern Standard

bradbamford — Mon, 06 May 2013 14:36:18 GMT

Great Module, but I have major issues with the styling.

When will this be upgraded to use the Dotnetnuke Standard Form Pattern found here:
http://uxguide.dotnetnuke.com/UIPatterns/Overview.aspx

Or better yet, 100% templateable?

New Post: customize email message

grl570810 — Tue, 23 Apr 2013 09:37:30 GMT

+1 from me for this enhancement. It would be most useful to be able to include images and formatting in the email.
Regards,
Graham

New Post: Odd treatment of Label Form Items in emailed submissions

grl570810 — Tue, 23 Apr 2013 09:35:31 GMT

Hi Michael,
I have a version 2.3.6 form installed on a DNN 6.1.5 site configured for HTML email submissions. When the email arrives every label form item results in a line in the email that contains just a : (where the label would be for a normal field) and a - where the value would be. It looks most odd.
Is there some way of avoiding this - it seems a bit buggy to me as I would either expect the label fields to not be included in the email since they are fixed, or the value they contain to be passed through into the email so they provide sub-headings in a similar manner to their use in the form on the site.
Comments?
Regards,
Graham

New Post: Slow File Upload

Maikl — Thu, 18 Apr 2013 06:08:40 GMT

Hi,

I never heard about issues with that, but I'll have a look at it.

At the moment I am quite busy, so don't blame me if this will last a while.

Best wishes
Michael

New Post: Slow File Upload

pryce — Tue, 09 Apr 2013 18:07:02 GMT

When submitting a form with a file upload field and a 292kb file, it takes over 2 minutes to complete the submission.

In contrast going to the the DNN File Manager and uploading the same file is almost instantaneous.

Any ideas to what might be causing the slowness?

New Post: Multiple page form?

Maikl — Wed, 27 Mar 2013 10:22:48 GMT

Sorry, this module does not support multi-page forms.

There are some form modules on the market that have this Feature, please try the DNN Store.

Best wishes
Michael

New Post: Multiple page form?

intelligent — Thu, 21 Mar 2013 16:19:36 GMT

Is there any way to create a multiple page form?

A doctor intake form we have is 8 pages long (very detailed). Is there any way to break up the form so that there is a single patient record for ALL the pages?

I can create 8 different forms on 8 pages and confirm each one to the next, bu that would create 8 patient records.

Any thoughts?

New Post: Conversion code for google adwords

Doro — Mon, 04 Feb 2013 11:49:04 GMT

Michael,

that's not what I wanted.

Thanks
Doro

New Post: Conversion code for google adwords

Maikl — Sat, 02 Feb 2013 08:38:10 GMT

Doro,

not directly, but what you can do is to redirect to another page on submission - please refer the documentation.

On this page you can add anything you want.

Best wishes
Michael

New Post: Conversion code for google adwords

Doro — Thu, 31 Jan 2013 12:38:40 GMT

Hello,

is it possible to install a conversion code for google adwords into helferleinform?
The code has been in place in the form of successfully sent.
How can I do that?

I use helferleinform 2.3.6 and babelfish 1.1.4

Sorry, my english is not the best.
Thanks
Doro

New Post: Help Text

pwadding1954 — Sat, 26 Jan 2013 00:23:08 GMT

Thank you Michael

I will be patient.

New Post: Help Text

Maikl — Fri, 25 Jan 2013 18:30:12 GMT

Peter,

In DNN 6 they had a breaking change to the Label control, so there is no more help icon there. Something changed again in DNN 7, and so I am a bit behind...

I am working on a new release to fix all of these issues, so please be patient...

Best wishes
Michael

New Post: Help Text

pwadding1954 — Fri, 25 Jan 2013 04:23:22 GMT

Hello

I can't seem to get the icon for help text to display. DNN 702 clean install.

After reading the documentation i noticed that themes can affect that. I have tried all Themes in module appearance including Disabled

Anything else i can try.

BTW other than that issue i like it!

Peter

New Post: Install issue DNN6.2.4 .NET 4

Timo_Design — Wed, 23 Jan 2013 11:03:29 GMT

The DB started back in the SQL 2000 days, but runs on SQL 2008 now.
I didn't notice it was still in that mode, changing that solved the issue.

Thanks, Timo

New Post: Confirmation email

PeterWill — Wed, 23 Jan 2013 07:40:52 GMT

Michael,
Yes that was what I did and it works fine. But I wanted to send another email as confirmation. I wanted the content in the email for the confirmation to be different than the email sent to the administartor.
But in this case we will manage as it is, now the email sent as confirmation is a copy of the email sent to the administartor.

Thanks for your support!
Best regards,
Peter

New Post: Confirmation email

Maikl — Wed, 23 Jan 2013 06:38:27 GMT

Hi Peter,

you need a "SendCopy" item for that. This item requires that

Submission by e-mail must be checked in the settings
A form field of the type E-Mail Address must be on the form, and
the sender has to be set to this form field

Otherwise, you will not see this option in the field type list when adding a new form item. It is also not available when there already is one.

Please refer to the documentation for further details.

Best wishes
Michael

New Post: Install issue DNN6.2.4 .NET 4

Maikl — Wed, 23 Jan 2013 06:18:49 GMT

Hi Timo,

SQL Server 2000 does not support the XML datatype which is used by helferlein_Form... If you do not have any other chance, there are some older versions of helferlein_Form available on www.helferlein.com which run on DNN 4 and SQL Server, but they are - of course - not supported any longer.

Best wishes
Michael

New Post: Install issue DNN6.2.4 .NET 4

Timo_Design — Mon, 21 Jan 2013 15:53:45 GMT

Ok, found it. The compatibility of the DB was set to 80 (SQL 2000), now that it is set higher the installer does work.

Timo

New Post: Install issue DNN6.2.4 .NET 4

Timo_Design — Mon, 21 Jan 2013 15:46:15 GMT

Hi Michael,

I just tried installing helferlein form on DNN 6.2.4 (.net 4.0)

And I get this install error:

Start Sql execution: 01.02.00.SqlDataProvider file
Failure SQL Execution resulted in following Exceptions:

System.Data.SqlClient.SqlException (0x80131904): ALTER TABLE failed because the

following SET options have incorrect settings: 'ARITHABORT'. Verify that SET

options are correct for use with indexed views and/or indexes on computed columns

and/or filtered indexes and/or query notifications and/or XML data type methods

and/or spatial index operations. at System.Data.SqlClient.SqlConnection.OnError

(SqlException exception, Boolean breakConnection) at

System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception,

Boolean breakConnection) at

System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() at

System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand

cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,

TdsParserStateObject stateObj) at

System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean

async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult

result, String methodName, Boolean sendToPipe) at

System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at

DotNetNuke.Data.SqlDataProvider.ExecuteADOScript(String SQL) at

DotNetNuke.Data.SqlDataProvider.ExecuteScript(String Script, Boolean

UseTransactions) -- This is to allow more than one label controls per form, but

require unique labels for all other controls ALTER TABLE dbo.helferlein_FormItem

ADD FormItemUniqueLabelPerForm AS (CASE WHEN FormItemLabel IS NULL THEN (LTRIM

(STR(PortalID)) + '-' + LTRIM(STR(ModuleID)) + '-' + LTRIM(STR(FormItemID)) + '-'

+ LEFT(LTRIM(RTRIM(CAST(FormItemValue AS nvarchar(100)))) + REPLICATE('-', 100),

100)) ELSE FormItemLabel END) PERSISTED System.Data.SqlClient.SqlException

(0x80131904): Column name 'FormItemUniqueLabelPerForm' does not exist in the

target table or view. Could not create constraint. See previous errors. at

System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean

breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError

(SqlException exception, Boolean breakConnection) at

System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() at

System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand

cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,

TdsParserStateObject stateObj) at

System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean

async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult

result, String methodName, Boolean sendToPipe) at

System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at

DotNetNuke.Data.SqlDataProvider.ExecuteADOScript(String SQL) at

DotNetNuke.Data.SqlDataProvider.ExecuteScript(String Script, Boolean

UseTransactions) ALTER TABLE dbo.helferlein_FormItem ADD CONSTRAINT

IX_helferlein_FormItem_UniqueLabelsPerForm UNIQUE ( PortalID ASC, ModuleID ASC,

FormItemUniqueLabelPerForm ASC ) ON [PRIMARY]
Info End Sql execution: 01.02.00.SqlDataProvider file

Do you have any idea what might cause this?

Thanks, Timo

New Post: DNN7 and Theform

PeterWill — Mon, 21 Jan 2013 14:25:40 GMT

Hello again!

I have done some tests now.
After changing the app pool to use .net 4.0, I could install HelferLein Form 2.3.6 and babelfish 1.1.4 without problems.
All seams to work just fine, but I still have the problem with scrabled characters.

We submit the form (HeleferleinForm) as e-mail and also to the database. The emails are fine, but characters like åäö are scrabled in the database. An example the name "Grönros" is stored in the database as "Grönros".

When we use the Helferleinform interface to look at the submission saved in the database it looks fine apart from the upper field (dropdown-list) which is crabled. When we look in the database all characters like åäö are scrambled. And when we export to Excel all characters are scrabled.

I do not understand how we can solve this. I do of course hope for help. Thanks so much in advance!

kind regards,
Peter